This configuration
CK-E020 · roller glue
| Carton range | 110–290 × 60–200 × 30–90 mm |
|---|---|
| Nominal output | 40–70 cartons/min |
| Air | No plant air required |
| Machine size | 2,945 × 700 × 1,160 mm |
Hot-melt glue carton sealing machine
CK-E020Roller-Glue Carton Sealing Machine
A compact roller-glue carton sealer with a 1.5 kg built-in glue tank, intended for lines that favor simple utilities and direct manual carton loading.
- Nominal output
- 40–70 cartons/min
- Catalogue carton range
- 110–290 × 60–200 × 30–90 mm
- Power supply
- 220 V · 50 Hz
Machine view · supplied product image
CK-E020
Will this carton path fit?
A semi-automatic hot-melt carton-sealing configuration with roller-glue application. Its stated carton envelope is a screening value, not proof of flap access or a finished seam.
This is the mid-size family. Use the catalogue dimensions to screen the carton, then confirm the dimension axes, feed orientation and flap layout.
Catalogue carton range110–290 × 60–200 × 30–90 mm
Nominal output40–70 cartons/min
Power supply220 V · 50 Hz
Air / glue configurationNo plant air required
Documented operation. The published roller-glue configuration uses direct manual carton loading. The carton state, feed direction and sealing result need review on the buyer's sample.
Not established by the catalogue. Your carton is not confirmed by dimensions alone. Confirm its empty or filled state at infeed, board and coating, flap sequence, glue seam, feed direction, stable output and the required acceptance check.
See the machine
in operation.
Review the supplied demonstration for this model. Filled-carton compatibility and bond strength are not established by the included material; confirm them with your actual sample.
Technical specifications.
| Nominal output | 40–70 cartons/min |
|---|---|
| Pack range | 110–290 × 60–200 × 30–90 mm |
| Automation | Semi-automatic |
| Power supply | 220 V · 50 Hz |
| Compressed air | No plant air required |
| Installed power | 3.46 kW |
| Sealing temperature | 180–200 °C |
| Machine size | 2,945 × 700 × 1,160 mm |
| Approximate weight | Approx. 300 kg |
- 01No compressed-air connection required
- 02Top exhaust connection for workshop fume extraction
- 03Sloped, finned glue tank for more even heating
- 04Taiwan T-VERTER variable-frequency drive
Specification source: Output and dimensions follow the 2025 model table. An older technical sheet gives a higher output limit and 1,170 mm height instead of 1,160 mm; confirm the current machine layout and sample output.
Catalogue values are for planning. Confirm current configuration, dimension axes, carton fit and stable output against actual samples before a technical agreement.
Plan the change
into your line.
Replace or upgrade an existing sealer
Use this as a replacement review, not a drop-in promise. Record the current machine, carton format and complete cycle, then map the infeed, outfeed and control handoff.
- 01
Known here
Supply: 220 V · 50 Hz. Air: No plant air required. Machine size: 2,945 × 700 × 1,160 mm.
- 02
Check at your site
Available space, installed envelope, power connection, air and exhaust where relevant, guards, infeed/outfeed height and controls handoff.
Move a manual carton step to a machine
All six carton models are listed as semi-automatic. The catalogue supports a review of what an operator loads, how the carton is presented and how it leaves the machine; it does not state a staffing outcome.
Confirm the actual carton presentation, handoff, inspection and format-change steps against your selected process.
Questions to close before an order
- 01
Changeover and glue
How are format adjustments made? What cleaning method and glue handling routine apply to the agreed configuration?
- 02
Parts and documents
Which wear parts, manuals, training, installation, support and warranty terms are included for this specific order?
- 03
Acceptance
Which carton, seam result, output condition and line-interface check will be used to accept the selected configuration?
Questions buyers ask about CK-E020.
What carton sizes are listed for CK-E020?
The catalogue range is 110–290 × 60–200 × 30–90 mm, in catalogue order. Confirm dimension axes, feed direction and flap geometry against the actual carton.
Is 40–70 cartons/min a guaranteed production rate?
No. This is a nominal catalogue range. Stable output depends on carton handling, material, adhesive, loading and the agreed sample trial.
Can CK-E020 seal cartons after filling?
The included material does not establish filled-carton compatibility for CK-E020. Confirm the product, flap sequence and line interfaces with an actual-sample review; another model’s demonstration is not evidence of this model’s fit.
Can food or medicine cartons be considered?
Yes, for a sample-led application review. Send the actual carton design, product-contact details and destination requirements. No sector-wide fit or certification is implied.
What should I send first?
Send open and closed carton photos, dieline, dimensions with feed direction, board/coating, glue seam, whether the carton is filled, and target stable output. Agree physical samples separately.
Can CK-E020 replace my current carton sealer?
A replacement cannot be assumed from the model name or catalogue dimensions. Compare the current carton format, complete cycle, infeed and outfeed, controls handoff, space, power and air with the proposed configuration.
What manual work remains with CK-E020?
This model is listed as semi-automatic. Confirm carton presentation, loading, handoff, inspection and format-change work for the actual process. The catalogue does not establish a staffing outcome.
Are the carton range and nominal output enough to approve the machine?
No. They are planning values. Confirm the dimension axes, feed direction, flap layout, carton state, adhesive seam, material and acceptance method with the actual sample.
What operating conditions should be confirmed before specifying CK-E020?
Review the stated 220 V · 50 Hz supply, no plant air required, the listed machine size, process interfaces and the current layout. Changeover, cleaning, parts, documentation, training, support and warranty scope must be agreed for the specific order.
Prepare your inquiry.
Record your carton and line requirements. Prepare a plain-text draft to keep or share with your chosen supplier.
Keep carton photos, a dieline, or a short line video with your draft for a future supplier review. File upload is not available here.